| |
 |
|
Oracle Database Tips by Donald Burleson
|
Current
Architectures
So what is it that will be replaced? A typical
modern Oracle server setup is shown in Figure 7.1.
Figure 7.1 shows a typical RAC setup utilizing the
most modern technologies: high speed interconnect; high speed HBA; and
high speed network connections all leading to the Achilles heel in all
architectures, the Storage Area Network (SAN or NAS) array with everything responding in microseconds except
for the poor old spinning disks which are proud to do milliseconds.
Even when RAM is stacked in front of the disks, the system will
eventually reach the point where the cache is full and the system is
once again forced back to the old disk limitations.
How would SSD look in the same configuration? For
now, the SAN would be lopped off and the SSD put in its place as shown
in Figure 7.2.
The move to RamSan is not arduous. In most
environments, the switch is accomplished in a matter of hours, if not
minutes. The time required to convert to SSD depends completely upon
how fast the database and other files can be copied to the RamSan.
It is important to note that the number of
channels accessing the RamSAN has been increased. With data bandwidth
of up to 3000 MB/sec on the RamSAN400, the extra channels will be
needed.
See
code depot for complete scripts
This is an excerpt from the book
Oracle RAC & Tuning with Solid State Disk.
You can get it for more than 30% by buying it directly from the
publisher and get immediate access to working code examples.
Market Survey of SSD vendors for
Oracle:
There are many vendors who offer rack-mount solid-state disk that
work with Oracle databases, and the competitive market ensures that
product offerings will continuously improve while prices fall.
SearchStorage notes that SSD is will soon replace platter disks and that
hundreds of SSD vendors may enter the market:
"The number of vendors in this category could rise to several
hundred in the next 3 years as enterprise users become more familiar
with the benefits of this type of storage."
As of January 2015, many of the major hardware vendors (including Sun and
EMC) are replacing slow disks with RAM-based disks, and
Sun announced that all
of their large servers will offer SSD.
Here are the major SSD vendors for Oracle databases
(vendors are listed alphabetically):
2008 rack mount SSD Performance Statistics
SearchStorage has done a comprehensive survey of rack mount SSD
vendors, and lists these SSD rack mount vendors, with this showing the
fastest rack-mount SSD devices:
| manufacturer |
model |
technology |
interface |
performance metrics and notes |
|
IBM |
RamSan-400 |
RAM SSD |
Fibre
Channel
InfiniBand
|
3,000MB/s random
sustained external throughput, 400,000 random IOPS |
|
Violin Memory |
Violin 1010 |
RAM SSD
|
PCIe
|
1,400MB/s read,
1,00MB/s write with ×4 PCIe, 3 microseconds latency |
|
Solid Access Technologies |
USSD 200FC |
RAM SSD |
Fibre Channel
SAS
SCSI
|
391MB/s random
sustained read or write per port (full duplex is 719MB/s), with
8 x 4Gbps FC ports aggregated throughput is approx 2,000MB/s,
320,000 IOPS |
|
Curtis |
HyperXCLR R1000 |
RAM SSD |
Fibre Channel
|
197MB/s sustained
R/W transfer rate, 35,000 IOPS |
Choosing the right SSD for Oracle
When evaluating SSD for Oracle databases you need
to consider performance (throughput and response time), reliability (Mean Time Between failures) and
TCO (total cost of ownership). Most SSD vendors will provide a
test RAM disk array for benchmark testing so that you can choose the
vendor who offers the best price/performance ratio.
Burleson Consulting does not partner with any SSD vendors and we
provide independent advice in this constantly-changing market. BC
was one of the earliest adopters of SSD for Oracle and we have been
deploying SSD on Oracle database since 2005 and we have experienced SSD
experts to help any Oracle shop evaluate whether SSD
is right for your application. BC experts can also help you choose
the SSD that is best for your database. Just
call 800-766-1884 or e-mail.:
 for
SSD support details. DRAM SSD
vs. Flash SSD
With all
the talk about the Oracle “flash cache”, it is important to note that there
are two types of SSD, and only DRAM SSD is suitable for Oracle database
storage. The flash type SSD suffers from serious shortcomings, namely
a degradation of access speed over time. At first, Flash SSD is 5
times faster than a platter disk, but after some usage the average read time
becomes far slower than a hard drive. For Oracle, only rack-mounted
DRAM SSD is acceptable for good performance:
|
|
Avg. Read speed
|
Avg. write speed
|
|
Platter disk
|
10.0 ms.
|
7.0 ms.
|
|
DRAM SSD
|
0.4 ms.
|
0.4 ms.
|
|
Flash SSD
|
1.7 ms.
|
94.5 ms.
|
|
|
|
|
